New Holland Dabung Tractor Specifications

  • ENGINE POWER OPERATING WEIGHT
    At flywheel 85 HP 2865kg
    ENGINE TRANSISSION
    New Holland 8045.05 Gearbox with constant-mesh gears:
    4-Stroke, direct injection diesel engine 8 forward and 2 reverse speeds.
    Number of cylinder: 4 Synchromesh on 3rd, 4th, 7th and 8th speeds
    Bore and stroke: 104 x 115 mm Double control lever
    Piston Displacement: 3,908 cc Differential lock with pedal actuated and automatic
    Flyweight type dynamic balancer. disconnection.
    Compression ratio: 17:1 Spur gear final drives.
    Max. Power at 2,600 rpm: 85 HP Gear Box mounted starter safety switch.
    Max. Torque at 1,600 rpm: 29.7 kgm FRONT AXLE
    Dry-type cylinder liners. Inverted U section, telescopic type, front weight 160kg.
    Cooling system: water TRACKS
    Five-row, brass tube and copper fin radiator Front (8 positions):
    Forced-feed lubrication system. 1.320 - 1,420 - 1,520 - 1,620
    Two power outlets for hydraulic pump on timing 1,720 - 1,820 - 1,920 - 2,020 mm.
    cover. Rear (8 positions):
    Distributor type fuel injection pump with 1,320 - 1,420 - 1,520 - 1,620
    mechanical Speed Governor. 1,720 - 1,820 - 1,920 - 2,020 mm.
    Exhaust Muffler: Vertical STEERING
    Five bearing crankshaft Hydrostatic power steering.
    Oil Cooler Minimum turning radius:
    FILTERS -with brakes: 3,600 mm
    Air: Oil-bath with pre-cleaner -without brakes: 4,400 mm
    Fuel: 2 replaceable cartridges; POWER TAKE OFF
    Oil: Easy-to-change, continuous-flow cartridge 6 spline shaft - 35 mm dia / 1 - 3 8�
    CLUTCH Fully independent: 540 rpm at 2,160 engine rpm
    Dual plate, dry-type with separate controls (pedal High-speed DTO (*) 35 mm dia / 1 - 3 8' same speed as engine.
    for transmission and hand lever for PTO), (*) for application of high speed implements
    Diameter of plates: 11 inch HYDRAULIC LIFT
    Cera Metallic Clutch Plate. With draft and position control,
    TYRES Draft control through top link.
    Front: 7.50-16 Rear: 18.4/15-30 Gear type pump driven from engine crankshaft.
    DRIVER�S SEAT Pump capacity (at 2,400 engine rpm). 26.7 l/min Relief valve opening pressure: 190kg/cm2
    Fully upholstered, with parallelogram suspension, 3-point linkage Cat I - II
    adjustable, foot step for ease. Sway chains.
    BODY Lift lever lock bracket.
    Front lifting hood. Three side access to Engine for Max. Lifting capacity: 2,150 kg
    ease of maintenance. BRAKES
    LIGHTING SYSTEM Oil immersed disc brakes.
    3-position headlights; (parking, low & high beam). Parking: manual lever on right side of operator.
    Blue high beam warning light on instrument panel. DIMENSIONS
    Adjustable head light mounted in the front grill, (With 7.50-16 and 18.4/15-30 tyres) a) Wheelbase: 2,070 mm b) Overall length: 3,330 mm c) Height to top of hood: 1,402 mm d) Height to steering wheel: 1,675 mm
    indicators, parking & hazard lights. e) Front track (8 positions):
    ELECTRICAL SYSTEM from 1,320 to 2,020 mm
    12 Volt starting system, 4hp (3KW) starter motor. f) Rear track (8 positions):
    400 Watts alternator, 108 ah battery. 7 pin from 1,320 to 2,020 mm
    connector for trolley. Cold Starting aid, Provision g) Ground clearance under front axle:
    for mobile charger and MP3. 500 mm
    INSTRUMENT PANEL ADDITIONAL
    Separate temperature, fuel gauge & hour meter. Rear seat, Front and Rear Weights, Towing Hook.
    CAPACITY OPTIONAL
    Fuel tank: 65 l Canopy, Swinging Draw bar, DTO pump
    Engine oil: 11.5 l applications and Creeper gear.
    Rear Axle: 4 l at each side
    Air Cleaner: 1 l
    Power Steering: 2 l